DPM Funktion och felsökning

Här länkar vi till de sprängskisser, handböcker m.m som finns på nätet.
Användarens profilbild
melmaq
Crew Member
Crew Member
Inlägg: 226
Blev medlem: 17 februari 2011, 15:41
Skoter: Skidoo Renegade X 860
Ort: Luleå, Hoting, Karbäcken
Kontakt:

DPM Funktion och felsökning

Inlägg av melmaq »

Bild

Air Temperature Sensor
At 20 °C, the sensor resistance must be 2500ohm ± 300. Sensor should also be tested through all its operating range. Use the following chart. Replace sensor if not within specifications.

Bild

Solenoid and MPEM- Static Test
Unplug electric connector of solenoid no. 20 and connect it to a 12 V battery. The solenoid must sound when it opens. Otherwise, replace solenoid.
Repeat test several times.

Dynamic Test
Air temperature sensor must be at 20 °C (68 °F). For the test, operate the engine at 3800 RPM.

The solenoid must vibrate. Otherwise, ensure fuse(s), wiring harness and
connections are in good condition and if so, try a new MPEM and retest.

Bild
Bild

melmaq

.