Enduro 400F Tekniska Specifikationer
-
- LynxTalk Member
- Inlägg: 5
- Blev medlem: 20 november 2017, 13:24
- Skoter: 1981 Citation SS
Enduro 400F Tekniska Specifikationer
Hej från USA
Använd Google översätt så snälla förlåt.
Letar efter teknisk dokumentation på Lynx Enduro 400F (2002-2005)
I USA skulle många människor vilja ändra sina Ski-doo 377/380-motorer till Enduro 400F-specifikationer för mer HP
Vi kan hitta ägarhandböcker som ger HP.
Män Vi har ingen teknisk information som komprimeringsförhållanden eller porttiming.
Har någon på Lynxtalk den här informationen? Finns det en online-länk till Service Manual för Enduro 400F
Hello from USA
Using Google translate so please forgive.
Looking for technical documentation on the Lynx Enduro 400F (2002-2005)
In the USA many people would like to modify their Ski-doo 377 / 380 motors to Enduro 400F specifications for more HP
We can find owners manuals that give HP.
But we have no technical information like Compression Ratio or port timing.
Does anyone on Lynxtalk have this information? Is there a online link to the Service manual for the Enduro 400F.
Använd Google översätt så snälla förlåt.
Letar efter teknisk dokumentation på Lynx Enduro 400F (2002-2005)
I USA skulle många människor vilja ändra sina Ski-doo 377/380-motorer till Enduro 400F-specifikationer för mer HP
Vi kan hitta ägarhandböcker som ger HP.
Män Vi har ingen teknisk information som komprimeringsförhållanden eller porttiming.
Har någon på Lynxtalk den här informationen? Finns det en online-länk till Service Manual för Enduro 400F
Hello from USA
Using Google translate so please forgive.
Looking for technical documentation on the Lynx Enduro 400F (2002-2005)
In the USA many people would like to modify their Ski-doo 377 / 380 motors to Enduro 400F specifications for more HP
We can find owners manuals that give HP.
But we have no technical information like Compression Ratio or port timing.
Does anyone on Lynxtalk have this information? Is there a online link to the Service manual for the Enduro 400F.
- 2stroke
- Crew Member
- Inlägg: 2322
- Blev medlem: 18 februari 2011, 14:37
- Skoter: LYNX R&D Prototype.
- Ort: Gällivare
- Kontakt:
Re: Enduro 400F Tekniska Specifikationer
Welcome to this site.
It's totally fine using English on this Forum.
It's totally fine using English on this Forum.
// 2stroke
* Var lojal mot ditt märke, behåll dina märkes kunskaper här på LynxTalk Forumet !! *
Kontakt : 2stroke@LynxTalk.se
* Var lojal mot ditt märke, behåll dina märkes kunskaper här på LynxTalk Forumet !! *
Kontakt : 2stroke@LynxTalk.se
-
- LynxTalk Member
- Inlägg: 5
- Blev medlem: 20 november 2017, 13:24
- Skoter: 1981 Citation SS
Re: Enduro 400F Tekniska Specifikationer
Thank you 2stroke for saying English OK
We have been looking for Info for three years
We found the Skidoo MXZ380 HO in the advertisement - 49HP
But the Skidoo 380HO is European model only - Not sold in USA. No information
Then we found Enduro 400F same sled but different decals
So I guess we could use Enduro 400F or Skidoo 380HO info. Most important is compression ratio but anything else would help
We have owners manual and parts list for Enduro 400F from BRP but they do not list what we need
thanks
We have been looking for Info for three years
We found the Skidoo MXZ380 HO in the advertisement - 49HP
But the Skidoo 380HO is European model only - Not sold in USA. No information
Then we found Enduro 400F same sled but different decals
So I guess we could use Enduro 400F or Skidoo 380HO info. Most important is compression ratio but anything else would help
We have owners manual and parts list for Enduro 400F from BRP but they do not list what we need
thanks
Du har inte behörighet att öppna de filer som bifogats till detta inlägg.
- DrMussla
- LynxTalk Member
- Inlägg: 445
- Blev medlem: 26 oktober 2014, 20:24
- Skoter: Boondocker 3900 DS, Larven, Finlandia GLX, MXZ440
- Ort: Vännäs
Re: Enduro 400F Tekniska Specifikationer
I have this for you...a specification booklet. Hope that helps.
https://drive.google.com/open?id=1EG4qI ... pbI4Lt7wpr
https://drive.google.com/open?id=1EG4qI ... pbI4Lt7wpr
-
- LynxTalk Member
- Inlägg: 5
- Blev medlem: 20 november 2017, 13:24
- Skoter: 1981 Citation SS
Re: Enduro 400F Tekniska Specifikationer
Thank you so much DrMussia
You have solved a 3 year old mystery!!
We had hoped that Lynx has the same type documentation as Ski-Doo
the specification booklet is exactly like the Ski-Doo version. Of course for different models.
One more question - Since the Specification Booklets are similar - Do you think there is also a Lynx Race Manual for the Enduro models?
The Race manuals in the USA have some "secrets" for tuning.
Would be nice to know what Lynx had in the same time...
Again thank you so much for finding the specification booklet
You have solved a 3 year old mystery!!
We had hoped that Lynx has the same type documentation as Ski-Doo
the specification booklet is exactly like the Ski-Doo version. Of course for different models.
One more question - Since the Specification Booklets are similar - Do you think there is also a Lynx Race Manual for the Enduro models?
The Race manuals in the USA have some "secrets" for tuning.
Would be nice to know what Lynx had in the same time...
Again thank you so much for finding the specification booklet
Du har inte behörighet att öppna de filer som bifogats till detta inlägg.
- DrMussla
- LynxTalk Member
- Inlägg: 445
- Blev medlem: 26 oktober 2014, 20:24
- Skoter: Boondocker 3900 DS, Larven, Finlandia GLX, MXZ440
- Ort: Vännäs
Re: Enduro 400F Tekniska Specifikationer
No problems.citation377 skrev:Thank you so much DrMussia
You have solved a 3 year old mystery!!
We had hoped that Lynx has the same type documentation as Skidoo - the specification booklet is exactly like the Skidoo version. Of course for different models.
One more question - Since the Specification Booklets are similar - Do you think there is also a Lynx Race Manual for the Enduro models?
The Race manuals in the USA have some "secrets" for tuning. Would be nice to know what Lynx had in the same time...
Again thank you so much for finding the specification booklet
I hope you find it useful and can gain some hp on your old sled
I think we only had the doo's race handbook at work.
But I can check later this year, I'm home with my kids right now.
- 2stroke
- Crew Member
- Inlägg: 2322
- Blev medlem: 18 februari 2011, 14:37
- Skoter: LYNX R&D Prototype.
- Ort: Gällivare
- Kontakt:
Re: Enduro 400F Tekniska Specifikationer
Both these sleds was sold as Sno-X sleds for the Junior class to fit the Nordic countries Sno-X Racing regulations.citation377 skrev:We have been looking for Info about the Rotax-380 H.O engine for three years
The only thing we have found is that the Rotax-380H.O. engine produce 49 Hp.
But the Skidoo MXZ-380HO is a European model only - Not sold in USA/Canada.
...Then we found Lynx Enduro-400F same sled but different decals
So I guess we could use Lynx Enduro-400F or Skidoo MXZ-380HO info.
Most important is compression ratio but anything else would help
We have found owners manual and parts list for Lynx Enduro-400F
but they do not list any technical information.
Thats why there is not so much information to find about them.
They were produced in very limited numbers.
Basicly they are the same chassi/sled.
The engine package is exactly the same.
However the Lynx sled had much better front and rear suspension compared to the Ski-Doo.
// 2stroke
* Var lojal mot ditt märke, behåll dina märkes kunskaper här på LynxTalk Forumet !! *
Kontakt : 2stroke@LynxTalk.se
* Var lojal mot ditt märke, behåll dina märkes kunskaper här på LynxTalk Forumet !! *
Kontakt : 2stroke@LynxTalk.se
-
- LynxTalk Member
- Inlägg: 362
- Blev medlem: 1 mars 2011, 09:45
- Skoter: Lynx GLS 3600 LC / Lynx Xterrain EFI 3700
- Ort: Forsa / Tänndalen
Re: Enduro 400F Tekniska Specifikationer
I hope you get something out of our forum as well even if most of it is written in swedish, it's a fantastic source of information for Lynx machines in particular but other machines as well.
My experience of Google translate is not so god, expecially when you do it in technical texts and as the texts in this forum might not be written in the perfect language for translation it might be an issue.
But don't hesitate to ask, we have a quite good english background from school so reading is seldom a problem
My experience of Google translate is not so god, expecially when you do it in technical texts and as the texts in this forum might not be written in the perfect language for translation it might be an issue.
But don't hesitate to ask, we have a quite good english background from school so reading is seldom a problem
-
- LynxTalk Member
- Inlägg: 5
- Blev medlem: 20 november 2017, 13:24
- Skoter: 1981 Citation SS
Re: Enduro 400F Tekniska Specifikationer
That is more good information 2stroke2stroke skrev:Both these sleds was sold as Sno-X sleds for the Junior class to fit the Nordic countries Sno-X Racing regulations.
Thats why there is not so much information to find about them.
They were produced in very limited numbers.
Basicly they are the same chassi/sled.
The engine package is exactly the same.
However the Lynx sled had much better front and rear suspension compared to the Ski-Doo.
I can see where the Junior class would mean only a few machines being built.
Actually in the USA that was what the Freestyle 300 single was used for - Junior class.
But they are easier to find because they had other uses too.
Thanks again
-
- LynxTalk Member
- Inlägg: 5
- Blev medlem: 20 november 2017, 13:24
- Skoter: 1981 Citation SS
Re: Enduro 400F Tekniska Specifikationer
Yes- I have already been looking through many of the old posts.MangE skrev:I hope you get something out of our forum as well even if most of it is written in swedish, it's a fantastic source of information for Lynx machines in particular but other machines as well.
My experience of Google translate is not so god, expecially when you do it in technical texts and as the texts in this forum might not be written in the perfect language for translation it might be an issue.
But don't hesitate to ask, we have a quite good english background from school so reading is seldom a problem
As you say, a lot of good information here.
Also found the "Old site" and started looking there,
Some of it makes me wish we had Lynx brand in the USA!
As far as translation - You are correct, Google technical translation is not always perfect.
But so far, since I know about snowmobiles, I have been able to figure it out.
However- I would not want to build an airplane from a translated manual.
Well, at least not fly in it
Thank you for the offer to help if I need it.